ROVE R3 FAQ
How to install and set it up?
ROVE R3 is a plug-and-play dash cam that comes ready to record by default settings right out of the box.
Installing the R3 is super simple; all you have to do is follow these easy steps:
1. Insert the memory card into the camera and format it before using it for the first time.
2. Place the sticky mount on your vehicle’s windshield. (Note: Apply the included electrostatic film before placing the sticky mount)
3. Now slide the primary camera to the sticky mount from left to right, and make sure the camera is securely mounted and steady.
4. Plug the 12 ft Type-C USB power cable into the front camera’s sticky windshield mount power port.
5. Insert the included ROVE’s USB fast car charger into your vehicle’s cigarette lighter socket.
6. Now install the rear camera to your vehicle’s rear windshield. Make sure you applied the included electrostatic film.
7. Connect the rear camera to the front camera’s rear connecting port using the included 6M Type-C USB cable.
8. Now plug the front camera’s power cable into the car charger and turn your vehicle on.
That’s it. Now the camera is all set and ready to witness your road activity.
How to install and remove the memory card?
To Install:
First, turn OFF the camera. Then align the memory card’s golden contacts facing toward the IPS touch screen of the camera. Insert the memory card halfway into the camera’s memory slot, then push the memory card all the way inward using your fingernails or paper clips until it clicks and locks in place.
To Remove:
To remove the memory card, gently push its edge inward until it clicks and pops out, then simply pull it out.
How to format the memory card?
“We highly recommend formatting the memory card before first-time use.”
Please follow these quick and easy steps to format the Micro-SD card:
1. Touch anywhere on your R3’s LCD screen to access the Menu Settings and press the ‘Gear’ icon.
2. Now you will see a Back option, Video Setting, and System Setting appearing on the left side of the screen.
3. Select the System Settings with the ‘Gear’ icon to go to the camera’s system settings.
4. Once you click the System Settings icon, you will see four options appearing on the right of the screen - ( WIFI, WIFI Mode, Format Micro-SD Card, and Time Zone)
5. Select the 3rd option (Format Micro-SD card) from the list.
6. You will see a confirmation message asking to confirm the process of formatting the memory card. Select the ‘Format’ option in green to proceed.
7. When the SD card formatting is completed, you will receive a message saying “Format Successful.”
How does WIFI work? Can I view my R3 dash cam’s live video remotely on my smartphone?
The built-in dual-band WIFI feature allows the ROVE R3 dash cam to pair with your smartphone, enabling you to access the dash cam’s features remotely on your phone.
YES, you can view the live recording of your dash cam remotely on your smartphone using the all-new ROVE app’s Live section. The only condition is you have to be within 10 FT from the camera with no obstruction in the middle. As soon as you move out of the 10 FT range, you will not see any live feed. Like any other standard dash cams, this is how ROVE R3’s WiFi works.
Can I Hardwire my unit?
YES, your ROVE R3 dash cam can be Hardwired.
Hardwiring your R3 is necessary in order to activate and enjoy its 24HR parking monitor feature. We recommend using ROVE’s own original Ultimate 3-lead Hardwire Kit because it is designed explicitly for R3 and comes with an additional ‘Voltage Cut-Off’ feature, preventing your vehicle’s battery drainage. Here is the link for the ROVE Ultimate 3-lead Hardwire Kit: https://www.rovedashcam.com/3-lead Hardwire Kit/
Does it record speed?
YES, the ROVE R3 can record speed.
R3 has a built-in GPS feature to track and record the vehicle's speed and location. You will find a speed stamp at the bottom of every footage showing how fast you were driving. You can use this later as evidence if needed. The speed will always be stamped on the video as long as the STAMPS feature is ON.
What is the camera’s password? I am getting the password error.
ROVE R3’s default WIFI password is ‘12345678’.
If you get WIFI’s password error, Make sure you enter the correct password. Reconfirm the current WiFi password of your dash cam by checking the camera’s screen. The current WiFi password will appear on the screen when you turn on the WiFi feature. It will be displayed after PWA2: ********
Can it record AUDIO?
ROVE R3 is fitted with a built-in microphone to record audio with the video.
You can MUTE/UNMUTE the video by going to the camera’s video setting > Record Audio > Choose ON/OFF or by simply tapping the microphone icon on the menu settings.
Where can I find the serial number?
You can find your R3 dash cam’s serial number in two places. The first is the camera's base/bottom part, and the second is its actual box from where it came.
How to set the correct date and time?
Setting the correct date and time on your R3 dash cam is quite easy. Follow one of the following steps below:
1. You can set the correct date and time of your choice manually by going to your dash cam’s System Settings and then the ‘Date/Time’ option.
2. You can also set GMT/UTC time-zone value instead. Setting this will enable the dash cam to select the correct date and time automatically, based on the GMT/UTC value selection when it receives a GPS signal lock. We ALWAYS recommend following the second step, which is setting the GMT/UTC value, because once you set your correct GMT Value under the Time Zone Setting, you will always have the valid date and time whenever you have a GPS signal lock.
We ALWAYS recommend following the second step, which is setting the GMT/UTC value, because once you set your correct GMT Value under the Time Zone Setting, you will always have the valid date and time whenever you have a GPS signal lock.
You can find your correct GMT Value by visiting this link. https://greenwichmeantime.com/time-zone/usa/
**NOTE: You may not get the correct date and time right away if you try inside your home because the dash cam will not be able to receive a GPS signal; thus, you have to wait until you go to your car and receive a GPS signal. Once your camera gets the GPS signal, you will always have the correct date and time.
Does this dash cam have a ZOOM IN/OUT option?
Unfortunately, the dash cam has no option to ZOOM IN/OUT the image details with the current firmware version. Our experts are already working on adding this option to the camera on the next firmware update.
In the meantime, we have TWO ways to do this.
1. ZOOM IN ON YOUR SMARTPHONE:
You can view the recorded video files using the ROVE App remotely on your iPhone/Android. You can download that video to the ROVE App first and then use the SHARE button to save that video to your device's photo album. You can then play that video directly from your phone’s video player and easily zoom in or out and view the details you need.
2. ZOOM IN ON YOUR PC:
Connect the camera directly to your Mac/PC by using the included 1M USB to Type-C data cable and select "Connect as USB Flash Drive". Once connected there are two ways, either you can play the video on the GPS Player then pause the frame and take a snapshot, and then you can zoom in on the saved photo and view the details.
OR You can also use the VLC media player and zoom in/out on the video by using the features of the VLC media player.
You can download the VLC media player free at www.videolan.org
Does it come with a memory card? If not, what is the recommended memory card to use?
Unfortunately, NO. The memory card is NOT included in the package of the ROVE R3 dash cam.
You need to purchase it separately.
We recommend using ROVE Ultimate Micro SD Card class 10, U3 speed Micro-SD card for its quality, durability, and faster read and write speed required for quality video recording.
You can purchase the memory card from our website or click here to buy one: ROVE Ultimate Micro SD Card
I can't connect my R3 with the ROVE APPs?
Some iOS versions have bugs that don't allow our APP to be connected to IoT (Internet of things) devices like this dash cam using cellular data and Wi-Fi simultaneously. Therefore, we suggest that you please turn OFF the cellular data when using the app, then the connection with R3 and the new ROVE APP will improve significantly.
https://www.rovedashcam.com/